BASIC INFO
General Purpose Pipe is used for water and gas. The pipe with small diameters from 12.7 to 108mm are produced from carbon steel grades S185, S195T, S235JRH, P195TR1, P235TR1 and other.
Pipes are produced by high-frequency welding with induction current lead.
Pipes are subjected to hydraulic and mechanical tests. Welds undergo non-destructive testing.
Square and rectangular section pipes are shaped from round electric-welded pipes on the line of the electric welding mill.
At the consumer’s request pipes are packed in hexagonal and box bundles. Pipe bundles are provided with removable
shipping straps for fixing in trans-shipment points and storage without additional pulling appliances
Product range and scope of application:
| Standard | Outside dia.. (mm) | Wall thickness (mm) | |||||||||
| 2 | 2.3 | 2.6 | 2.9 | 3.2 | 3.6 | 4 | 4.5 | 5 | 5.4 | ||
| DIN EN 10255 | 13.5 | • | • | ||||||||
| 17.2 | • | • | |||||||||
| 21.3 | • | • | • | ||||||||
| 26.9 | • | • | • | ||||||||
| 33.7 | • | • | • | ||||||||
| 42.4 | • | • | • | ||||||||
| 48.3 | • | • | • | ||||||||
| 60.3 | • | • | • | ||||||||
| 76.1 | • | • | • | ||||||||
| 88.9 | • | • | • | ||||||||
| 101.6 | • | ||||||||||
| 114.3 | • | • | • | ||||||||
Next： Large Diameter Pipe
